Chúng tôi chuyên sửa chữa các loại bo mạch trục chính Fanuc Lỗi Al01 Al02 … tại Nghệ An Hà Tĩnh, chúng tôi có các drive thay thế chính hãng từ Nhật, cung cấp đầy đủ các loại linh kiện máy phay tiện cnc tại Nghệ An Hà Tĩnh. Liên hệ Namfare 0522388776.
NEW INSTALL FOR A 6059-H203 TO 6059-H227 SPINDLE
DRIVE OR AN A20B-1003-0010 SPINDLE DRIVE PCB
1. Set the jumpers to match your old spindle PCB.
2. Move the software chips from the old spindle PCB to the new spindle PCB. See
the picture below.
Failure to move the software from the old drive to the new drive will cause the
display on the drive to be blank.
Please note: The chips are numbered and must be installed in the appropriate
socket. Please also note the chips have a notch or key in them and so does the
socket the chips go into. Please match the notch or key on the chip with the notch
or key on the socket.
3. Move the NVRAM chip which is at location MA25 (see picture below) from
the old spindle PCB to the new spindle PCB. This NVRAM chip contains your
parameters. It is much easier to move the chip than it is to key in the
parameters manually.
Please note: This chip and socket are also keyed and must be installed correctl