Bỏ qua nội dung
        • MÁY MÓC THIẾT BỊ TỰ ĐỘNG NAMFARE
        CÔNG TY TNHH NAM FARECÔNG TY TNHH NAM FARE
        • MÁY MÓC THIẾT BỊ TỰ ĐỘNG NAMFARE
        • HOTLINE: 0522 388 776
          • Trang Chủ
          • Máy Móc CNC
            • Máy Phay Tiện CNC
            • Máy Gia Công Gỗ
            • Máy Laser và Cắt Dây EDM
            • Máy Tự Động
          • Linh Kiện Vật Tư
            • Vật Tư Máy CNC
            • Linh Kiện Bo Mạch
            • Vật Tư Phụ Trợ
            • Thiết Bị Điện
          • Dịch Vụ Sửa Chữa
            • Sửa chữa máy CNC
            • Sửa Chữa Bo Mạch
          • Dự Án
          • Giới Thiệu
          • Liên Hệ
          Sửa Máy GSK Lỗi Thay Dao Và Lỗi Trục Chính Chạy Không Ổn Định Tại Thành Phố Vinh Nghệ An
          Trang chủ / Dịch Vụ Sửa Chữa / Sửa chữa máy CNC

          Sửa Máy GSK Lỗi Thay Dao Và Lỗi Trục Chính Chạy Không Ổn Định Tại Thành Phố Vinh Nghệ An

          Danh mục: Sửa chữa máy CNC
          Danh mục sản phẩm
          • Máy Laser và Cắt Dây EDM
          • Máy Phay Tiện CNC
          • Sửa chữa máy CNC
          • Vật Tư Máy CNC
          • Máy Gia Công Gỗ
          • Sửa Chữa Bo Mạch
          • Linh Kiện Bo Mạch
          • Thiết Bị Điện
          • Máy Tự Động
          • Vật Tư Phụ Trợ
          • Dịch Vụ Sửa Chữa
          • Linh Kiện Vật Tư
          • Máy Móc CNC
          • Mô tả

          Máy Phay Tiện chạy hệ điều hành GSK có thay dao thường bị rất nhiều lỗi trong quá trình sử dụng. Chúng tôi với đội ngũ kỹ thuật chuyên sâu về hệ điều hành GSK, Syntec, Weihong, LNC và các hãng China, chúng tôi tự tin sửa được và sửa dứt điểm các máy thường hay xảy ra lỗi. Chúng tôi sửa chữa tăng ca ngoài giờ hành chính và ngày lễ cuối tuần. Liên hệ Namfare để sửa chữa các lỗi về máy CNC qua sdt Zalo 0937029193. Máy móc thường hay hư hỏng, nhiều khách hàng thắc mắc: Vì sao cần quy trình bảo trì, sửa chữa máy móc thiết bị ? Như đã biết cùng với con người thì máy móc thiết bị là yếu tố không thể thiếu trong sản xuất, do quá trình bảo dưỡng không đúng định kỳ hoặc không đúng kỹ thuật có thể làm máy hư nhanh và thậm chí hư năng. Chúng tôi chuyên sửa chữa bảo trì và nâng cấp các đời máy hãng Gsk, Hitech, Beijer, Advantech, Syntec, Systec, Sửa máy CNC tại Bình Dương. Sửa chữa máy CNC tất cả các hãng: Fanuc, Mitsubishi, Máy tự động phay tiện cơ bến cát, cung cấp bạc đạn bến cát bình dương, gia công motor bến cát, gia công motor bến cát, ngoài ra chúng tôi còn chuyên cung cấp dịch vụ sửa chữa máy CNC, trục chính, vít me, board mạch, Spindle, Main, Power supply, Servo, hệ thống điều khiển máy CNC.Dịch vụ Sửa chữa Bảo trì máy CNC các hãng: Fanuc, Mitsubishi, Amada, Mazak, Siemens, Okuma, Toshiba, Hyundai, Hitachi, LS, Mori Seiki, GSK, Okk,

          E001~E009: Alarms in PARAMETER, OFFSET operation mode;
          E100~ E199:Alarms in EDIT operation mode;
          E200~ E299:Alarms in PROGRAM COMMAND;
          E600~ E699:Alarms in PROGRAM CHECK;
          E300~ E399:Alarms in JOG, AUTO operation mode when executing relative operation;
          E400~ E499:Related Alarms in JOG, AUTO operation mode when executing statements.
          Alarm
          No.
          Alarm prompt Alarm reason Troubleshooting
          E201 Illegal command The system undefined command
          appears in block
          Input again according system
          command list
          E202 Command repeat The same command is input repeatedly in
          the program
          Delete the repeated command
          E203 Illegal information The system unidentified command
          appears in block
          Delete the wrong command,
          Input the correct command
          E204 Command format
          wrong
          The command format is wrong in the
          block
          Input again according the
          correct command format
          E205 Command isn’t
          compatible
          Two or more commands incompatibility
          appear in the same block
          Delete the unwanted
          command or line input
          E206 Lack of information Missed the command needed content in
          the block
          Input the command needed
          content according the correct
          format
          E207 Tool tip radius too
          much
          tool nose radius is too big or path is too
          short, can’t make the tool nose radius
          compensation
          Modify program or tool nose
          radius(happen in running)
          E208 Brackets is miss Without brackets in the statement Brackets are added to the
          E209 Too many
          commands &
          characters
          The command character in same block is
          over 20
          Modify source program, or line
          input
          E210 Surplus characters Unwanted field is input in the block Delete the unwanted field in
          the block
          E211 Data exceeding
          range
          The value in the block is over the
          specified range
          Modify the is wrong data again
          E212 Errors in data The data don’t meet the standard Modify the is wrong data again
          E213 Single block is too
          long
          The whole line number of part program is
          over the range
          Modify the workpiece program
          E214 Use command
          independently
          some commands are in an alone block
          without others
          Modify the source program
          E215 Lack of line number The specified program line number of
          command G71, G72, M96, M97, M98
          doesn’t exist in this program i.e. the
          system has not found the line number for
          the call or the transfer
          Modify the source program,
          input the correct block line
          number
          E216 Line number repeat Repeated program line number in
          program makes the block
          G71/G72/M96/M97/M98 not be identified
          i.e. the program has more than two call or
          transfer needed line number
          There is repeated program line
          number in modifying program
          E217 Program stock data
          has err
          System EMS memory error or program
          error
          Need the professional to
          check the system all sided
          E218 Errors in variable
          NO
          The variable number exceeds the set
          range
          Using the usable variable
          number
          E219 Edit area is
          unusable
          System battery is shortage Need to clear out program,
          Edit the program again
          E220 Sentences
          calculate, divisor is 0
          In the statement operation, the divisor is
          zero
          Modify the divisor in macro
          command, not to be zero
          E221 Not assign a value
          to variable
          Input interface variable is read only,
          can’t evaluate it i.e. input
          Modify source program
          E222 Program executes,
          information lost
          The data has problem in program
          translate and edit process
          Power on again

          E224 Buffer area file too
          big
          The editing single program is too big Modify source program
          E225 Orbit data can’t
          compensate
          Edit error, can’t make the tool nose
          radius compensation
          Modify source program
          E226 Coordinate fields
          repeat
          Coordinate field repeat Delete one field of them
          E227 Data format wrong Data format error (such as: F1r1, G1r,
          M1r, T2r), or commands like G1r, M1r, T2r
          are used.
          Modify source program
          E228 Program hasn’t end
          command
          The program don’t have the ending
          command M02 or M20 or M30
          Modify source program, add
          the ending command
          E232 Errors in command
          data after G92
          The followed command data don’t meet
          the format
          Modify source program
          E233 No user-defined
          command
          At first make program for the needed
          user-defined command M60, then harden
          it
          Write M60 program, then
          harden it
          E234 Data field repeat The same field in block is input repeatedly Delete the repeat data field
          E235 G71/G72 not inc &
          dec relations
          The coordinate data in block which is
          followed command G71/G72 doesn’t meet
          the condition of increase or decrease by
          degrees
          Modify source program
          E236 Forbid com exist
          G71/G72 (forbid
          commands exist in
          The block followed G71/G72 command
          doesn’t include the motion command
          beside G01/G02/G03
          Modify source program

          Công ty TNHH NAMFARE
          MST: 3703122568
          Hotline/ Zalo: 0937029193
          Email: namfaregroup@gmail.com
          Địa chỉ: Thửa đất số 883, tờ bản đồ số 04, đường ĐT741, Khu Phố An Lợi, Phường Hòa Lợi, Bến Cát, Tỉnh Bình Dương, Việt nam
          TK: Ngân Hàng ACB, Chi Nhánh Thuận An, Công ty TNHH NAM FARE, STK: 6868976

           

           

           

          Sản phẩm tương tự

          Sửa máy CNC Mazak M4, M5, T Plus, Cam T2
          Xem nhanh

          Sửa chữa máy CNC

          Sửa máy CNC Mazak M4, M5, T Plus, Cam T2

          Sửa lỗi chảy dầu trục chính máy tiện CNC tại Bình Phước
          Xem nhanh

          Sửa chữa máy CNC

          Sửa lỗi chảy dầu trục chính máy tiện CNC tại Bình Phước

          Sửa Mâm Xoay Đài Dao Máy Tiện CNC Ở Bình Dương - Dịch Vụ Sửa Chữa Căn Chỉnh Đài Dao Máy Tiện CNC Các Loại
          Xem nhanh

          Sửa chữa máy CNC

          Sửa Mâm Xoay Đài Dao Máy Tiện CNC Ở Bình Dương – Dịch Vụ Sửa Chữa Căn Chỉnh Đài Dao Máy Tiện CNC Các Loại

          Sửa chữa máy móc tự động CNC tại Bình Dương
          Xem nhanh

          Sửa chữa máy CNC

          Sửa chữa máy móc tự động CNC tại Bình Dương

          Dịch Vụ Sửa chữa, bảo trì, Bảo Dưỡng, Nâng cấp máy CNC tại Bình Dương
          Xem nhanh

          Sửa chữa máy CNC

          Dịch Vụ Sửa chữa, bảo trì, Bảo Dưỡng, Nâng cấp máy CNC tại Bình Dương

          Sửa Máy Phay Tiện CNC Bình Dương Lỗi Drive Alarm Bo Mạch Chập Cháy
          Xem nhanh

          Sửa chữa máy CNC

          Sửa Máy Phay Tiện CNC Bình Dương Lỗi Drive Alarm Bo Mạch Chập Cháy

          Dịch Vụ Sửa Chữa Nâng Cấp Máy Cắt Dây CNC Bình Dương
          Xem nhanh

          Sửa chữa máy CNC

          Dịch Vụ Sửa Chữa Nâng Cấp Máy Cắt Dây CNC Bình Dương

          Sửa máy Mazak CNC tại Bình Dương chạy bị giật
          Xem nhanh

          Sửa chữa máy CNC

          Sửa máy Mazak CNC tại Bình Dương chạy bị giật

          Công ty TNHH NAM FARE

           


          MST : 3703122568

          CHI NHÁNH 1

           

          Thửa đất số 883, tờ bản đồ số 04, đường ĐT741, KP. An Lợi, P. Hòa Lợi, Bến Cát, Bình Dương.
          Hotline/ Zalo: 0937 029 193

          CHI NHÁNH 2

           

          Quốc lộ 1A, Thành Phố Vinh, Tỉnh Nghệ An.
          Hotline/ Zalo: 0522 388 776
          Email: namfaregroup@gmail.com

          • Trang Chủ
          • Máy Móc CNC
            • Máy Phay Tiện CNC
            • Máy Gia Công Gỗ
            • Máy Laser và Cắt Dây EDM
            • Máy Tự Động
          • Linh Kiện Vật Tư
            • Vật Tư Máy CNC
            • Linh Kiện Bo Mạch
            • Vật Tư Phụ Trợ
            • Thiết Bị Điện
          • Dịch Vụ Sửa Chữa
            • Sửa chữa máy CNC
            • Sửa Chữa Bo Mạch
          • Dự Án
          • Giới Thiệu
          • Liên Hệ
          • Đăng nhập
          • MÁY MÓC THIẾT BỊ TỰ ĐỘNG NAMFARE
          Zalo
          Phone

          Đăng nhập

          Quên mật khẩu?